CNC milling
3 / 4 / 5-axis
Product catalogue · 2026 edition
Ten categories.
One quote sheet.
Ten capability lanes. All items available in made-to-specification or production quantities. Request a quotation for any line — we reply within 24 hours.
Product range
Custom CNC machining
Our main workshop. CNC milling (3, 4, 5-axis) and CNC turning for prototypes, short-run, and full production — on the same lines. No minimum order, routine repeat contracts welcome. Send a drawing and we quote within 24 hours.
— CNC capabilities
CNC turning
Shafts · housings · fittings
Vertical lathes
Large-diameter parts
Prototype → production
One-off to mass run
— Recent machined parts
Stainless mounting plate
Milled · drilled · tapped
Stainless mounting plate
Multi-feature panel
Aluminium turned hub
Centre bore · side ports
Stainless precision part
5-axis machined
Aluminium component
Tight-tolerance feature
Stainless housing
Milled · bored · finished
Brass turned bushing
Square-socket drive
Machined bracket
Drilled and counterbored
Aluminium part
Custom geometry
Stainless component
Milled to drawing
Standards & materials
Send a drawing — STEP · IGES · DWG · PDF. Quote within 24 hours. Sample at your door within 10 days.
Aluminium · Stainless steel · Mild steel · Brass · Copper · Titanium · Engineering plastics (PTFE, POM, nylon, PEEK)
Product range
Pipe fittings & flanges
Seamless and welded pipe fittings plus forged flanges in carbon steel, stainless steel, nickel alloy, and duplex grades. Manufactured to ASME, DIN, and GB standards.
— Pipe fittings
Butt-weld elbow
45° · 90° · 180°
Equal tee
Reducing available
Reducer
Concentric · eccentric
Stub end
Lap-joint type
— Forged flanges
Weld-neck
PN6 – PN160
Slip-on
Carbon · stainless
Blind
Pressure rated
Threaded
Raised · flat face
Standards & materials
ASME B16.9 / B16.5 · DIN / EN 10253 · GB/T 12459
Carbon steel (A234 WPB) · Stainless 304 / 316L · Nickel alloy (Inconel 600/625, Hastelloy C276) · Duplex 2205
Product range
High-pressure forgings & supports
High-integrity forged fittings for power, petrochemical, and process-industry applications. Engineered pipeline supports, clamps, and hangers supplied to customer specification.
— Forged fittings
Socket-weld tees
Carbon & alloy steel
Y-branch cross
High-pressure service
Forged reducer
Boiler & main-steam
— Pipeline supports & hangers
Pipe shoes & clamps
Power-plant grade
Pipe clamp assemblies
Structural steel
Hanger brackets
Custom fabrication
Product range
Coated & insulated piping
Anti-corrosion and thermal-insulation piping for district heating, oil & gas, and water utilities. Factory-applied 3LPE, FBE, and polyurethane-jacket systems supplied with matched fittings.
— Coated & jacketed pipe systems
3LPE coated pipe
DN50 – DN1200
FBE / 2PE coated
Oil & gas pipelines
Insulated pipe
District heating
Insulated fittings
Elbow · tee · reducer
Product range
Industrial materials
Stocked in the UK for same-week dispatch. Silicone, PTFE, EPDM, and related industrial materials — cut to length, packed to order.
— Stocked materials
Silicone tubing
Food-grade & industrial
Clear translucent silicone tube, food-safe and industrial formulations. Sizes from 8 mm ID × 12 mm OD. Flexible, temperature-stable, reusable.
PTFE rod
White · 1 m lengths
High-purity PTFE round rod for gaskets, seals, insulators, and bearing surfaces. Chemically inert, low friction, wide temperature range.
EPDM / Neoprene foam
Self-adhesive seal tape
Closed-cell foam strip with sticky-backed seal tape. Weatherproof, compressible — ideal for enclosures, doors, and vibration damping.
Product range
Sheet metal fabrication
Laser-cut, bent, and welded sheet metal brackets, channels, enclosures, and panels. Zinc-plated, galvanised, powder-coated, or stainless. Prototypes through volume production on the same lines.
— Recent sheet metal parts
Mounting bracket
Bent · welded · zinc-plated
Sheet channel
Folded U-section
Pressed-end channel
Drilled mounting pattern
Steel bracket
Cut, formed, finished
Galvanised channel
Multi-hole, formed
Sheet metal frame
Welded sub-assembly
Stamped panel
Custom-formed
Bracket assembly
Mild steel · zinc-plated
Standards & materials
Material gauges 0.5 mm – 6 mm. Bend tolerance ±0.2 mm. Spot-weld, MIG, TIG, and laser welding. Zinc, galvanised, powder-coat, anodised finishes.
Mild steel · Galvanised steel · Stainless 304 / 316L · Aluminium · Copper · Brass
Product range
Metal stamping
Pressed, drawn, and stamped metal parts: washers, gaskets, retainers, brackets, and deep-drawn cups. Zinc-plated and stainless finishes. Tooling supplied for volume parts; small-batch runs from existing dies.
— Recent stamped parts
Zinc-plated washer set
Flat & drawn forms
Pressed retainer
Drawn cup form
Flange ring
Stamped + drilled
Drawn cap
Deep-draw form
Stamped washer
High-volume part
Pressed cup
Square-hole retainer
Stamped bracket
Multi-feature stamping
Pressed disc
Stainless finish
Drawn seal
Custom profile
Stamped spacer
Coined edge
Pressed plate
Formed feature
Stamped component
Custom geometry
Standards & materials
Single-stage, progressive, and deep-draw tooling. Material thickness 0.3 mm – 6 mm. Tolerance ±0.05 mm on critical features.
Mild steel · Stainless 304 / 316L · Aluminium · Copper · Brass · Phosphor bronze
Product range
Grommets
TPV / EPDM / silicone cable grommets, entry seals, strain reliefs, glands and accessories — from stepped 4–25 mm bungs to large M50–M110+ transit grommets on a moulded flange base. Customisable TPV (fire-resistant / low-smoke, high tear strength). Moulded in-house — we cover the whole process. IP54–IP68 sealing, for control panels, switchgear and IP-rated enclosures.
— Cable management range
Large-cable transit grommet
M63+ · fire-resistant TPV
Stepped TPV bungs
One part covers 4–25 mm
Stepped cross-section
Multi-step internal profile
Concentric ring face
Knife-trim to next ring up
Dimensional schematic
Custom-sized to your spec
Standards & materials
IP54 to IP68 sealing. PA66 / brass nickel-plated / stainless 316 gland bodies. EMC / ATEX scope confirmed at quote stage.
Customisable TPV (fire-resistant / LSZH · high tear strength) · EPDM · silicone (incl. USP Class VI) · PA66 · brass · stainless 316
Product range
Custom gears — plastic & metal
Custom plastic and metal gears made to your drawing or sample. Spur, helical, worm and worm wheels, bevel, internal / ring, planetary sets, racks, splines, sprockets, pulleys and cams. POM / acetal, nylon, PEEK, steel, stainless and brass — injection moulded at volume (tooling supplied) or hobbed and machined for metal and low-volume runs. Obsolete gears reverse-engineered from a sample.
— POM / acetal gear samples
POM gear programme
Spur · worm · planetary · cam
Moulded acetal gears
Office equipment · appliances
Geared clutch assembly
Moulded POM · multi-feature
Precision moulded housing
POM · tight-tolerance bore
Standards & materials
Made to gear data (module · tooth count · pressure angle) or matched to a sample. Injection moulded at volume; hobbed / milled / ground for metal & low runs. Gear-quality grade confirmed at quote stage.
POM / acetal · nylon PA66 (incl. glass-filled) · PEEK · case-hardened steel · stainless 303 / 316 · brass · phosphor bronze · aluminium
Product range
Iron, steel & metal castings
Sand, investment (lost-wax) and die casting in grey iron, ductile (SG) iron, cast steel, stainless, aluminium and bronze. Drainage and access castings to BS EN 124 (manhole covers, gully gratings, channel drainage, load classes A15–F900), plus engineering castings — pump and valve bodies, housings, brackets, counterweights, pulleys and machine bases. Pattern-making, CNC machining and protective coating in line. Made to drawing or sample.
— Casting samples
Ductile-iron access cover
BS EN 124 D400 · recessed
Cored hollow section
As-cast · internal ribbing
Cast frames & channels
Drainage / access frames
Perforated cover plate
Sand-cast iron
Standards & materials
BS EN 124 load classes A15–F900 (access covers / gratings). EN 1561 grey iron · EN 1563 ductile iron · cast-steel grades to spec. Material certs, test reports and load-test certificates on request.
Grey cast iron · ductile / SG iron · cast carbon & alloy steel · stainless · aluminium · bronze · brass
Industries served
Specified in every major process sector.
Petroleum
Natural Gas
Chemical
Power
Shipbuilding
Water Treatment
Paper & Pulp
Nuclear
Request a quotation
Share your drawing or spec.
We reply within 24 hours.
FOB and DDP-landed pricing, material grade, lead time, and MOQ — on a single quote sheet. UK-based point of contact from enquiry through to delivery.